17 November 2026

Heavy-Duty Driveline Rebuilds and Balancing: A Buyer's Guide to Custom Fabrication and Truck Parts Quality

Presented by @raymondzrce686

Business Name: Anderson Brothers Truck & Equipment
Address: 2640 State Hwy 99 N #1, Eugene, OR 97402
Phone: (541) 688-8686

Anderson Brothers Truck & Equipment

Anderson Brothers Truck & Equipment is a long-established truck parts and repair company located in Eugene, Oregon. Founded in 1949, the business has served the region for more than 70 years, building a reputation as a reliable source for heavy-duty truck parts, custom fabrication, and equipment repair. The company works with commercial vehicle owners, fleets, and equipment operators who need dependable parts and services to keep their trucks operating safely and efficiently.

A core focus of Anderson Brothers is providing specialized services for heavy-duty trucks and equipment. Their shop offers custom driveline fabrication and repair, helping customers build, rebuild, or balance drivelines for a wide range of applications. They also specialize in custom U-bolt bending and fabrication, producing precisely sized components for trucks and other heavy equipment. In addition, the company sells both new and used truck parts, stocking a large inventory and offering local delivery in the Eugene and Springfield areas.

Beyond parts sales, Anderson Brothers provides repair and maintenance services for truck components such as transmissions, differentials, and related systems. Their experienced team focuses on delivering practical, cost-effective solutions that help keep trucks and equipment running reliably. With decades of experience and a commitment to local service, Anderson Brothers Truck & Equipment continues to support the trucking and transportation industries throughout Eugene and surrounding communities.

View on Google Maps
2640 State Hwy 99 N #1, Eugene, OR 97402
Business Hours
  • Monday: 7:30 AM–6 PM
  • Tuesday: 7:30 AM–6 PM
  • Wednesday: 7:30 AM–6 PM
  • Thursday: 7:30 AM–6 PM
  • Friday: 7:30 AM–6 PM
  • Saturday: 8 AM–2 PM
  • Sunday: Closed
  • Follow Us:
  • Facebook: https://www.facebook.com/andersonbrotherseugene
  • Instagram: https://www.instagram.com/andersonbrotherste/


    Downtime has a cost, and driveline vibration has a method of making that rate climb. It starts as a hum under the floor or a mirror that blurs at 45 mph, then becomes u-joint heat, carrier bearing failure, and a service call on the shoulder. The stakes are not abstract. Excess vibration enhances wear throughout the entire chassis. Tires scallop, transmission installs split, differential pinion seals weep, and fuel economy drops half a mile per gallon. If you depend upon a truck to make, a clean-running driveline is a bottom-line item.

    You do not require to become a machinist to buy driveline work wisely. You do need to understand how quality appears, what tolerances matter, and how to arrange a genuine rebuilder from somebody who is simply painting rusty shafts and pressing in captive u-joints. This guide walks through the procedure and the decisions, from measurement and phasing to balancing and custom parts. It covers where custom fabrication makes sense, what great shops provide, and how to avoid costly do-overs.

    What a driveline does, and how sturdy changes the rules

    At its easiest, a driveline sends rotating power from the transmission or transfer case to the axle pinion. In heavy trucks and occupation equipment the assembly frequently spans long distances and multiple joints. You might see a two-piece shaft with a provider bearing on a highway tractor, or three pieces with an intermediate jackshaft under a mixer or dispose truck. As length grows, so does the requirement for exact positioning and balance. A couple of thousandths of an inch of runout that would be safe in a short vehicle shaft can become a shaker when multiplied over 80 inches of tube and two or three joints.

    Common parts you will experience:

    • Tubes, typically 3.5 to 6 inches in size, with wall thickness from around 0.083 to 0.250 inch depending upon torque and span.
    • Weld yokes and slip yokes that mate to universal joints and splines.
    • Universal joints, greasable or sealed, in some cases with high-angle or full-round caps for severe service.
    • Center or provider bearings for multi-piece drivelines.
    • Flange yokes or companion flanges at the transmission and differential.
    • Safety loops or guards in specific applications.

    Heavy-duty brings much heavier torque pulsation from diesel engines, steeper angles from lifted suspensions or heavy loads, and longer unsupported lengths. Those elements raise level of sensitivity to phasing, runout, and balance.

    Classic symptoms, and what they mean

    Vibration has signatures. Experienced techs can frequently think the source by frequency and vehicle speed.

    A steady buzz that appears at a specific roadway speed, independent of engine rpm, indicate driveline imbalance or runout. It will frequently peak around a crucial shaft speed, then taper off or move if you upshift and change driveshaft rpm at a provided road speed.

    A cyclic growl or rumble that changes on throttle tip-in may be a u-joint brinelling in one plane. Heat at a single cap, dry rust powder under a u-joint strap, or micro-spalling inside the caps validates it.

    A shudder on launch, then smooth travelling, tends to be an angle concern or a used slip spline binding as the suspension moves.

    A drumming at 20 to 30 miles per hour that vanishes above 40 regularly implicates a provider bearing support or a floppy center support bracket.

    Not all shakes come from drivelines. Tires with damaged belts, bent wheels, out-of-round brake drums, bad engine mounts, or a damaged pinion yoke can make complex the photo. Before authorizing a rebuild, it is fair to ask the shop to inspect yoke pilots, flange face runout, and u-joint bores. A mindful store isolates the issue instead of hanging parts.

    The rebuild, step by action, and what quality looks like

    A correct rebuild starts with assessment. The store checks tube straightness, yoke bore wear, spline lash, and the match in between companion flanges. A lot of utilize a V-block and dial sign, or they mount the shaft in a lathe. Anything over about 0.010 inch overall suggested runout on a normal highway-length tube is suspect. On long areas, target worths are tighter.

    Tube replacement is common. If television is dented, kinked, heavily worn away, or split at the weld toe, it requires new steel. Good rebuilders stock DOM and electrical resistance bonded tube in typical diameters and wall thicknesses, then cut to length, prep on a lathe, and fit new weld yokes. Ask whether they use a mandrel to guarantee concentricity through the weld, and whether they correct the alignment of after welding. Heat input during welding can pull a tube out of real. Shops that skip aligning end up chasing balance weights later.

    Phasing matters. U-joints must be lined up so that the input and output angular accelerations cancel. On a single-piece shaft with two u-joints, the yokes at both ends must be in line. On multi-piece assemblies the phases repeat at each section referenced to the carrier bearing bracket. If a shaft was marked at disassembly, those witness marks guide phasing on reassembly. If a shop returns your shaft without stage marks, ask to include scribe marks or paint stripes. It conserves time the next time the carrier bearing requires replacement.

    U-joint options are not trivial. Greasable joints are convenient and can last a very long time in fleet service, but every hole drilled for a zerk lowers cross strength and can focus stress. Sealed sturdy joints with larger trunnions bring more load and often run smoother. On highway tractors, a high quality sealed joint can run 300 to 500 thousand miles. On mixers, refuse trucks, or rake trucks that see contamination and steep angles, greasable full-round joints might be the winner. The secret is consistent upkeep and preventing low-cost bearings with soft caps that fret in the yokes.

    Slip splines deserve attention. If you feel notchiness as you compress the slip by hand, it is worn. Look for polishing, wide lash, or dry rust on the male spline. Some applications utilize covered splines or dust boots to extend life. An oversize or long travel slip might be required after wheelbase changes. It is better to spec the best slip length than to trust a limited engagement that tears out under axle wrap.

    Carrier bearings stop working in two ways. The rubber isolator rips or collapses, or the bearing itself brinnells. Either can trigger positioning shifts, especially under torque. When changing a carrier, check the bracket and shims, and validate the bracket is not bent. Even a couple of millimeters of balanced out can alter joint angles enough to feed vibration at highway speeds.

    Once bonded and phased, the assembly goes to the balancer. That is where good stores different themselves.

    What balancing actually entails

    Balancing is not a single number on a screen. It is a procedure of measuring recurring unbalance and correcting it with weights exactly put at one or more planes. Short, stiff shafts may just need single aircraft corrections close to the center of mass. Long durable drivelines generally need 2 airplane dynamic balancing. The balancer spins the shaft at a set speed and procedures amplitude and angle of unbalance at each end. The operator then includes weight at prescribed clock angles.

    Numbers differ by store and by shaft size, however a competent target for a highway tractor shaft is frequently in the series of a few gram inches to low ounce inches per aircraft. The point is not the specific system, it is consistency and documentation. If you request for balance reports, a serious store can print or email them, including correction weights and their positions.

    Critical speed is the killer that often gets neglected. Every shaft has a speed where it wants to bow or whip. That speed depends on length, diameter, wall density, support bearings, and product. You can approximate it roughly, but stores with experience know to check forecasted service rpm versus critical speed. They may upsize tube size to raise the margin, custom U bolts reduce periods with an included provider bearing, or change tube density to alter tightness. Paint can conceal sins, but it will not change crucial speed. If a truck returns with a shaft that vibrates just in top gear at highway speeds, and the vibration scales with speed but not load, crucial speed is suspect.

    Weight design matters too. Weld-on pieces provide strong retention in off-road service, however they can complicate future weld repair work and trap particles. Stick-on weights look tidy but can fly off in heat and oil. Ask the shop how they secure weights and whether they seal over corrections to keep balance stable in service.

    Finally, some issues need on-vehicle balancing. When a vibration reveals only under really particular load and speed windows, and a free-spinning shaft on a bench balancer looks fine, an on-truck balancer can reveal resonance in the put together system. Couple of shops do this typically, but it is a mark of a diagnostician rather than a parts hanger.

    Materials, fabrication, and the small information that include up

    Tube quality drives service life. Drawn-over-mandrel tube offers a smooth inside size, tight tolerance, and great straightness. Electric resistance bonded tube can work well in moderate service if the weld seam is managed and oriented consistently. On extreme torque builds, thicker walls tame deflection, however weight climbs up and crucial speed drops for a given diameter. Many occupation drivelines live in between 0.120 and 0.188 inch wall, while very long periods or high torque setups use 0.219 or 0.250. There is no complimentary lunch. Heavier wall deals with abuse but needs attention to balance and speed limits.

    Yoke metallurgy appears when you tighten up straps or press bearings. Low-cost cast yokes deform, and the cap tires oval out. Excellent yokes are created and machined to spec. Look for clean fillets, consistent surface in the bores, and no chatter on the clamp faces. If you run full-round joints with bearing straps, the bolt holes should not be extended or out of round. On strap and bolt joints, reuse bolts only if they fulfill the maker's torque spec and are not necked.

    Weld quality shows up. An uniform bead with correct width, free of undercut or porosity, tells you the welder controlled heat input. Excessive bluing or burned paint far beyond the joint hints at bad heat control and most likely tube distortion. After welding, truing is not optional. Correcting presses and dial indications come out before the shaft ever strikes the balancer.

    Phasing marks are totally free to add and save disappointment down the road. So are paint dots on the caps that connect back to documented torque specifications. Little touches like those associate with careful balancing.

    When custom fabrication is the best move

    If you altered wheelbase, moved a transmission, swapped an axle ratio with a various pinion offset, or added a PTO, stock parts may not fit or perform. Custom fabrication shines when geometry modifications. Examples from the shop floor:

    • A logging truck that got a 20 inch stinger for a self-loader needed a two-piece driveline with an included carrier bearing to keep vital speed above cruise rpm.
    • A dump truck with an aftermarket rubber block suspension crouched crammed and raised angles at the rear joint past 6 degrees. A larger diameter tube and high-angle u-joints brought angles and velocity change into a safe zone.
    • An older refuse truck with damaged crossmembers required a new center assistance bracket. The shop produced a gusseted plate, then used shims to bring the provider bearing back into plane with the gearbox output.

    Custom U Bolts go into the story faster than many owners anticipate. Axle real estate seats, leaf spring loads, and aftermarket lift obstructs tend to make basic shelf U-bolts a dangerous guess. An appropriate U-bolt has the right bend radius to match the axle tube, rolled threads for strength at the root, proper leg length to record the stack with space for a few threads proud, and either zinc plating or a finishing to slow corrosion. Bent-from-all-thread is a common corner cut that fails early. Shops that make Custom U Bolts in-house take measurements from the real axle and spring stack and bend on a press with the right passes away. Torque matters here too. A heavy tandem axle can require 250 to 450 pound feet on U-bolt nuts. Without that securing force, the axle can walk and throw pinion angle into chaos. If your driveline developed vibration right after spring work, put a torque wrench on every U-bolt, then recheck angles.

    How to measure for a new or reconstructed shaft without guessing

    Shops can just construct what you request for, and measurement errors result in expensive returns. When in doubt, a good rebuilder will crawl under the truck and procedure face to face. If you should provide dimensions yourself, use this brief checklist.

    • Record the vehicle at ride height, on the ground, with typical load. Measure from flange face to flange face, not off the edges of the yokes.
    • Note spline count and significant size on slip yokes. Count two times. Many appearance alike initially glance.
    • Check pilot sizes and bolt patterns on buddy flanges. A millimeter mistake can prevent assembly.
    • Capture u-joint series by determining cap size and span between yoke ears. Do not presume based on year or model.
    • Document operating angles at each joint. A simple digital angle finder on the yokes and tube gives you the information to keep each joint under approximately 3 degrees for highway use, or to validate high-angle parts if needed.

    If the chassis is incomplete or the angle will change with final ride height, make that clear. A couple of included words on the work order about air ride pressure or empty versus loaded position avoid surprises.

    Choosing the right shop, and what to ask before you buy

    A couple of questions separate the true driveline professionals from parts swappers and paint artists.

    • What balance approach do you use on heavy-duty drivelines, single airplane or 2 airplane, and can you provide balance reports if needed?
    • What runout spec do you hold on finished tubes of my length? How do you appropriate weld pull, and do you align before balancing?
    • What tube stock and yokes do you use, and how do you select wall density and size for critical speed margin in my application?
    • How do you stage and mark multi-piece drivelines relative to the provider bearing bracket, and do you record u-joint torque specifications on return?
    • What service warranty do you offer on rebuilt drivelines, u-joints, and provider bearings, and what failures are omitted, such as bent yokes from impact or running beyond angle limits?

    Clear, particular responses are a good sign. So is a shop that decreases a job if your asked for geometry will run too near important speed. That kind of pushback conserves you roadway calls later.

    Truck parts quality, and where to spend versus save

    Not all Truck Parts bring equal weight in driveline health. You can typically save cash on non-rotating brackets or safety loops. Invest carefully on the rotating core.

    U-joints sit at the top of the quality stack. Trustworthy brands hold tolerances on cap diameter and trunnion finish. Cheap joints included sloppy needles that pound into dust and caps that worry in the yoke. If rate appears too good, it is. In employment fleets, a failed joint typically takes straps, caps, and often ears with it. The resulting downtime dwarfs the savings.

    Carrier bearings are another part where quality shows up. Look at the rubber isolator. Company, uniform rubber with excellent bond lines and a beefy bracket lives longer than thin rubber that droops in months. Bearings with correct seals and grease fill last. Purchasing a total support that matches your frame bracket simplifies shimming and alignment.

    Slip yokes and splines should match material and coating to the environment. In salt areas, a phosphate or nickel treatment can slow pitting. If you run heavy PTO usage at odd angles, a slip with more engagement length reduces wear. When the spline rocks, no amount of grease will recover a smooth launch.

    Companion flanges have pilots that focus the joint. Use here is subtle but major. If the pilot gets wallowed, focusing shifts off the bolts and you will chase balance forever. Replace used flanges instead of stacking tolerance on tolerance.

    For non-rotating hardware, Custom U Bolts be worthy of the exact same respect as the rotating pieces. They keep the axle in place, which controls pinion angle under load. Quality U-bolts with appropriate nuts and hardened washers hold torque. Request for rolled threads and validate surface. In fleets that service gravel or off-road, a coat of paint or wax on exposed threads pays for itself.

    Angles, trip height, and multi-piece alignment

    Even the very best balanced shaft will shake if joint angles are incorrect. Universal joints do not transfer torque at constant speed when angled. Two joints in series, correctly phased and at equivalent angles, cancel each other's speed variation. Issues occur when the angles vary, or when the center bearing in a multi-piece shaft sits off-plane.

    For highway usage, keeping operating angle at each joint under about 3 degrees is a good rule. Under 1 degree is perfect but frequently not practical with frame crossmembers and packaging. Employment trucks that cycle suspension travel more must have low angles at small ride height to lower wear. Use a digital inclinometer to determine the transmission output, the shaft, and the pinion. The angle in between the shaft and each yoke face is what matters. Do not presume frame level equals angle correct.

    On two-piece drivelines, the center bearing should be square to the first shaft and in airplane with the output. A shim stack that is off by even a percentage sets the 2nd shaft at an odd angle and adds a radio frequency rumble. Many carriers mount on slotted holes. Torque the fasteners with the truck at trip height and recheck after a hundred miles. Rubber relaxes, and shims can seat.

    Suspension modifications complicate whatever. Air ride that runs a different pressure empty versus filled will alter pinion angle in service. A lift that utilizes blocks without pinion angle correction can press a rear joint beyond its delighted range. Before you blame balance, check ride height, torque rods, leaf spring bushings, and U-bolt torque.

    Cost, turn-around, and sensible expectations

    Prices move with area and supply, but common ranges hold across stores that do cautious work.

    A straightforward single-piece highway driveline with new tube, 2 new u-joints, and dynamic balance frequently lands in the 500 to 1,200 dollar range. A long, big diameter tube with premium joints may run higher. Multi-piece assemblies with a new provider bearing, three joints, and alignment can range from 1,200 to 3,000 dollars depending on material and parts brand. Balance just, if your parts are sound, can be 150 to 400 dollars.

    Turnaround times differ with workload and parts on hand. A shop that stocks typical tube sizes, weld yokes, and u-joints can turn an easy rebuild in a day or two. Custom fabrication that changes diameter, adds a carrier bracket, or requires unusual yokes takes longer. Expect a week if parts should be ordered.

    If you need field service or on-vehicle balancing, consider travel and setup charges. Spending for a tech who brings an angle finder, torque wrench, and the judgment to say no to a bad geometry is hardly ever wasted money.

    Maintenance that keeps balance true

    A well balanced shaft can head out once again if maintenance slips. Grease periods for u-joints vary, however a useful rhythm for daily-use trade trucks is every 5 to 10 thousand miles, quicker in wet or contaminated environments. Purge old grease up until fresh appears at all 4 caps, then wipe excess that can draw in grit. Do not forget the slip spline. A percentage of the right grease on the male and inside the female minimizes stick-slip shudder. Use grease suggested for splines, typically a moly blend.

    Torque checks stop parts from strolling. After any driveline service, put a torque wrench on strap bolts, provider bearing fasteners, and Custom U Bolts at 50 to 100 miles. Straps extend a little, rubber seats, and paint crushes. Validating clamp load captures problems early. Record these checks. If a strap bolt turns quickly after a brief run, change it. Stretched bolts do not hold torque reliably.

    Keep an eye on seals and installs. A pinion seal that starts weeping might be a result, not a cause. Vibration hammers seals and bearings. Engine and transmission installs that sag transfer more motion into the shaft. Replace per schedule or at the first sign of cracking.

    Finally, treat balance weights with regard. If you observe a missing out on weight or a fresh bare metal patch where a weight used to sit, get the shaft rebalanced before it gets bearings.

    Final buying advice

    You can purchase driveline work the method individuals purchase tires, by price and accessibility, or you can buy it the method fleets with low downtime do, by specification and reputation. Bring data. Angles, lengths, spline counts, and expected load help a great store construct once and construct right. Ask for tolerances, not slogans. Anticipate to pay a little bit more for tight balancing, straight tubes, and recorded phasing. It repays in less callbacks and less time on the shoulder.

    When work expands beyond an easy rebuild, do not hesitate of custom fabrication. If geometry changes, custom beats compromise. That includes Custom U Bolts for suspension integrity and proper pinion angle. When you add a carrier bearing or change tube size, have the store talk you through vital speed and the compromises in between stiffness and weight. If they speak in particular numbers and useful restrictions, you are in great hands.

    Drivelines are not attractive Truck Parts. They do their finest work undetected. With the ideal choices and a store that cares about the thousandths, they will stay that way.

    Anderson Brothers Truck & Equipment is located in Eugene, Oregon
    Anderson Brothers Truck & Equipment was founded in 1949
    Anderson Brothers Truck & Equipment serves commercial truck owners
    Anderson Brothers Truck & Equipment serves fleet operators
    Anderson Brothers Truck & Equipment provides heavy-duty truck parts
    Anderson Brothers Truck & Equipment provides truck equipment repair services
    Anderson Brothers Truck & Equipment specializes in driveline fabrication
    Anderson Brothers Truck & Equipment performs driveline repair
    Anderson Brothers Truck & Equipment offers custom U-bolt bending
    Anderson Brothers Truck & Equipment manufactures custom U-bolts
    Anderson Brothers Truck & Equipment sells new truck parts
    Anderson Brothers Truck & Equipment sells used truck parts
    Anderson Brothers Truck & Equipment maintains heavy-duty trucks
    Anderson Brothers Truck & Equipment repairs truck transmissions
    Anderson Brothers Truck & Equipment repairs truck differentials
    Anderson Brothers Truck & Equipment supports the trucking industry
    Anderson Brothers Truck & Equipment operates in Lane County, Oregon
    Anderson Brothers Truck & Equipment provides parts delivery services
    Anderson Brothers Truck & Equipment supplies components for heavy equipment
    Anderson Brothers Truck & Equipment serves customers in Eugene and Springfield, Oregon
    Anderson Brothers Truck & Equipment has a phone number of (541) 688-8686
    Anderson Brothers Truck & Equipment has an address of 2640 State Hwy 99 N #1, Eugene, OR 97402
    Anderson Brothers Truck & Equipment has a website https://andersonbrotherste.com/
    Anderson Brothers Truck & Equipment has Google Maps listing https://maps.app.goo.gl/ta67Qi9fc5DCZZzp7
    Anderson Brothers Truck & Equipment has Facebook page https://www.facebook.com/andersonbrotherseugene
    Anderson Brothers Truck & Equipment has an Instagram page https://www.instagram.com/andersonbrotherste/
    Anderson Brothers Truck & Equipment won Top Driveline and Truck Part Company 2025
    Anderson Brothers Truck & Equipment earned Best Customer Service Award 2024
    Anderson Brothers Truck & Equipment was awarded Best Custom U Bolts 2025

    People Also Ask about Anderson Brothers Truck & Equipment


    What does Anderson Brothers Truck & Equipment do in Eugene, Oregon?

    Anderson Brothers Truck & Equipment is a Eugene-based truck parts and repair company that provides custom U-bolt bending, driveline repair and replacement, new and used truck parts, and other medium- and heavy-duty truck services. They have served the area since 1949.

    Where is Anderson Brothers Truck & Equipment located?

    Anderson Brothers Truck & Equipment is located at 2640 Highway 99 N, Eugene, Oregon 97402. Our website also lists phone number (541) 688-8686 and business hours for local customers needing parts or repair service.

    How long has Anderson Brothers Truck & Equipment been in business?

    Anderson Brothers has been serving Eugene since 1949. The business is a long-established local provider of truck parts, fabrication, and repair services.

    Does Anderson Brothers Truck & Equipment sell new and used truck parts?

    Yes. Anderson Brothers sells both new and used truck parts for medium- and heavy-duty vehicles. We focus on parts categories such as brakes and drums, wheel shafts, Baldwin filters, straps and tie downs, exhaust parts, and other accessories.

    Does Anderson Brothers Truck & Equipment offer local truck parts delivery?

    Yes. The company offers local delivery for truck parts in Eugene and Springfield, and our truck parts page also notes delivery to Eugene, Springfield, and surrounding areas.

    What driveline services does Anderson Brothers Truck & Equipment provide?

    Anderson Brothers specializes in custom driveline solutions, including driveline replacement, drive shaft repair, and precision fabrication. These services are available for heavy trucks, cars, and pickup trucks.

    Can Anderson Brothers Truck & Equipment make custom U-bolts?

    Yes. We offer custom U-bolt bending in Eugene and can produce U-bolts in different lengths, widths, thread sizes, and thicknesses. We can bend both round and square U-bolts depending on the application.

    What truck repair services does Anderson Brothers Truck & Equipment offer?

    We perform repair and maintenance work for medium- and heavy-duty trucks, including flywheel resurfacing, oil changes, brake services, suspension repair, and king pin replacement. We work to reduce downtime and keep trucks performing at their best.

    What truck brands does Anderson Brothers Truck & Equipment service and supply parts for?

    Anderson Brothers says it services and supplies parts for major truck and equipment brands including Freightliner, Kenworth, Peterbilt, Mack, Volvo, and Cummins, among others.

    Who owns Anderson Brothers Truck & Equipment?

    Anderson Brothers is now led by the Weld Family, who also own Buck’s Sanitary Services and Royal Flush Environmental Services. The current ownership remains focused on serving Eugene and the surrounding community.

    Where is Anderson Brothers Truck & Equipment located?

    The Anderson Brothers Truck & Equipment is conveniently located at 2640 State Hwy 99 N #1, Eugene, OR 97402. You can easily find directions on Google Maps or call at (541) 688-8686 Monday through Friday 7:30am to 6:00pm, Saturday 8:00am to 2:00pm. Closed Sundays.


    How can I contact Anderson Brothers Truck & Equipment?


    You can contact Anderson Brothers Truck & Equipment by phone at: (541) 688-8686, visit their website at https://andersonbrotherste.com/ or connect on social media via Facebook or Instagram



    After visiting Skinner Butte Park, truck owners and fleet managers nearby often rely on trusted Drivelines service, Custom U Bolts fabrication, and dependable Truck Parts to keep their vehicles running smoothly.